Table of Contents
Advertisement
Sense-Up
(4)
(5) D-WDR
(6)Video Orientation
(7) Day & Night
(8) White Balance
(9) Denoise
5.3.2 Video Setting
User may select 2 streaming output simultaneously:
Streaming 1 Setting
Streaming 2 Setting
NOTE:
Max Video Frame Rate for both streaming combined is 30 FPS.
5.3.2.1 Video System: click the drop down list to select the system type "NTSC/PAL" and TV Output
(analog signal).
This function increases the sensitivity of camera to get brighter
image at night. The smaller the value you select, the slower the
shutter speed becomes so that the image will get brighter, and
moving subjects might be blurred.
Digital wide dynamic range. This function enables the camera
to reduce the contrast in the view to avoid the dark zones
resulting from over and under exposure.
Flip or mirror the image as your requirement.
The camera can detect the light level of environment. If you
choose "Light Sensor Mode", the image will be turned to black
and white at night in order to keep clear. To set light sensor
mode, appoint a lux standard of switching D/N here. Current lux
value is provided for reference. Under "Times Mode" the switch
time of Color / Black and white is according to the given time.
You can also control it by choosing "Color" or "B/W"
Enhance red / blue color in the image.
This function is able to filter the noise and blur from the image
and show a clearer view. "3D" and "2D" are two different
denoising approaches.
3D denoise analyzes successive pictures to detect the noise
places while 2D denoise analyzes only single picture.
Basic mode and Advanced mode.
Basic mode, Advanced mode, and 3GPP mode
56
User's Manual of ICA-3250V
Advertisement
Table of Contents
