Table of Contents
Advertisement
7. PRECAUTIONS IN SALES PROMOTION
In the interest of promoting the safest and most efficient use of the Model CD14F Dry Cut Metal Saw by all of our
customers, it is very important that at the time of sale the salesperson carefully ensures that the buyer seriously
recognizes the importance of the contents of the Instruction Manual, and fully understands the meaning of the
precautions listed on the nameplate attached to each machine.
7-1. Instruction Manual
Although every effort is made in each step of design, manufacture and inspection to provide protection against
safety hazards, the dangers inherent in the use of any electric tool cannot be completely eliminated.
Accordingly, general precautions for the use of electric power tools, and specific precautions and suggestions for
the use of the model are listed in the Instruction Manual to enhance the safe, efficient use of the machine by the
customer. Salespersons must be thoroughly familiar with the contents of the Instruction Manual to be able to offer
appropriate guidance to the customer during sales promotion.
7-2. Precautions of the Nameplate
Each Model CD 14F is furnished with a nameplate that lists the following precautions.
(1) Advise the customer to become thoroughly familiar with the contents of the Instruction Manual before
attempting to operate the machine.
(2) Eye protections are intended to prevent chips, dust and sparks from flying into the eyes of the operator during
operation. Carefully caution the customer to wear eye protection whenever operating the machine.
(3) Instruct the customer to thoroughly read the Instruction Manual prior to attempting to operate the machine.
7-3. Warning Label (A)
Fig. 5
Warning label (A) specified by UL is affixed on
the upper lefthand portion of the motor
housing. Please instruct customers to strictly
observe the contents from 1 to 10 in warning
label (A) shown at the left.
--- 6 ---
Advertisement
Table of Contents
