Tool Specifications; For Your Safety; Machine Elements - Bosch GHO 26-82 Operating Instructions Manual

EURO • BA 2 609 140 180 • GHO 26-82 • GB • OSW 02/04
2 609 140 180.book Seite 1 Mittwoch, 3. April 2002 9:19 09

Tool Specifications

Planer
Order number
Rated power
Output power
No-load speed
Planing depth
Rebating depth
Planer width (max.)
Weight (without
accessories) approx.
Protection class
Please observe the order number of your machine.
The trade names of the individual machines may vary.

Machine Elements

1 Fastening bolt for rebating depth stop*
2 Rebating depth stop*
3 Chip ejector (alternatively right/left)
4 Adjustment knob for planing depth
5 Planing depth scale
6 Change-lever for direction of chip ejection
7 Switch lock
8 On/Off switch
9 Belt cover
10 Screw for belt cover
11 Planer shoe
12 V-grooves
13 Parallel guide*
14 Fastening bolt for parallel and angle guide
15 Locking nut for adjustment of rebating width
16 Scale for rebating width
17 Angle guide*
18 Locking nut for angle adjustment
19 Dust/wood chip bag with adapter*
20 Vacuum hose*
21 Blade protector
22 Blade head
23 Blade-clamping element
24 Fastening screws for planer blade
25 Allen key
26 HM/TC planer blade
27 Large belt pulley
28 Drive belt
29 Small belt pulley
* Not all of the accessories illustrated or described are
included as standard delivery.
11 • 2 609 140 180 • TMS • 08.03.02
GHO 26-82
0 601 594 1..
[W] 710
[W] 400
[rpm] 16 500
[mm] 0 – 2.6
for the first time, ask for a practical demon-
[mm] 0 – 9.0
stration. In addition, the general safety notes
[mm] 82 in the enclosed booklet must be observed.
[kg] 2.6
/ II
English - 1

For Your Safety

Working safely with this ma-
chine is possible only when the
operating and safety information
are read completely and the in-
structions contained therein are
strictly followed. Before using
Wear safety glasses, protective gloves and
sturdy shoes.
For long hair, wear hair protection. Work only
with closely fitting clothes.
If the mains cable is damaged or cut through
while working, do not touch the cable but im-
mediately pull the mains plug. Never use the
machine with a damaged cable.
Connect machines that are used in the open
via a residual current device (RCD) with an ac-
tuating current of 30 mA maximum. Use only
extension cables that are approved for outdoor
use.
Always direct the cable to the rear away from
the machine.
Apply the machine to the workpiece only when
switched on.
Use only sharp planing blades.
Always hold the machine firmly when working
and ensure a secure stance.
Keep hands away from rotating parts.
The planer shoe 11 must lay flat on the surface
when working.
Never plane over metal objects such as nails
or screws.
Do not allow fingers to enter the chip ejector 3.
Always switch the machine off and wait until it
has come to a standstill before placing it down.
Never allow children to use the machine.
Bosch is only able to ensure perfect operation
of the machine if the original accessories in-
tended for it are used.