Initialising A Memory Card - JVC GR-DVX44 Instructions Manual

36
EN
Display
PROTEC T
DELE E T
DPOF
CANCEL
FORM AT
EXECUTE
RETUR N
FO MAT R
FO MAT R – CANCEL
EXECUTE
ERASE AL L
EX ST I NG I F I LE ?
VIDEO/DSC Switch
Power Switch
Lock Button
MENU Wheel
MEMORY Menu
Confirmation
Screen
S
D.S.C. PLAYBACK

Initialising A Memory Card

You can initialise a memory card anytime.
After initialising, all files and data stored in the memory
card, including those which have been protected, are
cleared.
1
Set the VIDEO/DSC Switch to "
Power Switch to "
Lock Button located on the switch.
2
Press the MENU Wheel in. The Menu Screen
appears.
3
Rotate the MENU Wheel to select "
and press it. The MEMORY Menu appears.
4
Rotate the MENU Wheel to select "FORMAT" and
press it. The Confirmation Screen appears.
5
Rotate the MENU Wheel to select "EXECUTE" and
press it. The memory card is initialised. When
initialisation is finished, "NO FILES STORED" or
"NO SOUND FILES" appears.
•To cancel initialisation, rotate the MENU Wheel to
select "CANCEL" and press it.
CAUTION:
Do not perform any other operation (such as turning
off the camcorder) during initialisation. Also, be sure
to use the provided AC Adapter, as the memory card
may be corrupted if the battery becomes exhausted
during initialisation. If the memory card becomes
corrupted initialise it.
(cont.)
", then set the
" while pressing down the
MEMORY"