JVC GR-DVM96 Instructions Manual page 35

10
Rotate the MENU
Wheel to select
"EXECUTE", and press
it. The normal
playback screen
appears.
To cancel selection,
rotate the MENU
Wheel to select "RETURN", and press it.
To Print By Selecting Still Images And Number
Of Prints
1
Perform steps 1 – 8 in "To Print All Still Images
(One Print For Each)" (
2
Rotate the MENU
Wheel to select
"CURRENT", and
press it. The DPOF
screen appears.
3
Press 3 or 5 to
select the desired file.
4
Rotate the MENU Wheel to select the number
indication (00), and press it.
5
Select the number of
prints by rotating the
MENU Wheel and
press it.
Repeat steps 3
through 5 for the
desired number of
prints.
The number of prints can be set up to 15.
To correct the number of prints, select the
image again and change the number.
6
Rotate the MENU
Wheel to select
"RETURN", and press
it. The "SAVE?"
appears.
If you did not
change any settings
in step 3 through 5,
the Menu Screen reappears.
7
Rotate the MENU Wheel to select "EXECUTE" to
save the setting you have just made, and press it.
To cancel selection, rotate the MENU Wheel to
select "CANCEL", and press it.
DPOF
AL L 1 ?
EXECUTE
RETURN
pg. 34).
DPOF
SHEETS
0 0
RETURN
DPOF
SHEETS
0 5
DPOF
SAVE?
EXECUTE
CANCEL
To Reset The Number Of Prints
1
Perform steps 1 – 8 in "To Print All Still Images
(One Print For Each)" (
2
Rotate the MENU Wheel to select "RESET", and
press it. The DPOF screen appears.
3
Rotate the MENU Wheel to select "EXECUTE",
and press it. The normal playback screen
appears.
To cancel selection, rotate the MENU Wheel to
select "RETURN", and press it.
The number of prints is reset to 0 for all still
images.
CAUTION:
While performing the above, never disconnect
power, as this may cause the memory card to be
corrupted.
35
EN
pg. 34).