22
EN
Tape Remaining Indicator
The time remaining on the tape is automatically
monitored and displayed in the LCD monitor
(
pg. 74). When the tape ends, "TAPE END"
appears in the LCD monitor. If the LCD monitor
indications are turned off (
remaining indicator appears when remaining time
reaches 2 minutes.
1 min
blinking
pg. 23), the tape
90 min
89 min
REC
2 min
blinking
3 min
0 min
blinking
RECORDING
What Happens When You Shoot Sideways
If the camcorder is held horizon-
tally (on its side) while shooting,
the recorded/played-back image
also appears on its side.
Holding The Camcorder
1
GRASP CAMCORDER
Grasp the camcorder with the pinkie finger
positioned under the bottom of the camcorder.
•Be sure to use the provided hand strap.
•The grip is also recommended.
2
OPEN LCD MONITOR
Hold the camcorder with both hands for stable
shooting.
•Be careful not to push the LCD monitor or
the buttons you do not wish to use.
(Cont.)