Washer Description; Installation - Frigidaire FWTE09M3FEJW Instruction Manual

Washer description

Name of parts
1 Wash cover
2 Control panel
Spin cover
3
4 Frame
Spin tub
5
6 Lint filter
Wash tub
7
2
1
6
7
8
9
10
11
12
05
8 Case
9 Pulsator
Plug
10
11 Base
Safety cover
12
13 Water inlet hose
3
4
5
13

Installation

The installation must be carried out by authorized people and in agreement with
the instructions indicated by the manufacturer.
Incorrect installation could cause personal damages.
Location of washer
The washing machine should be placed inside the room with a flat floor, which
is convenient for water supply and drain, has low moisture and no direct
sunshine, and does not freeze in winter.
Attention
1. If the washing machine is not placed flat (the inclination angle is over 2 ), it
may cause great vibration or automatic check and rectification or other
abnormal circumstances will often take place in the course of spinning.
2. Never place the washing machine on a carpet.
3. Get away from fire and heat.
Unpack
Take the washing machine to the place to be installed and unpacked it. All the
material of the packing, including the foam of the base must be retire, if not the
washing machine will not work.
Installation of water inlet pipe
1. Put the water inlet pipe screw on to the tap.
2. Tightly screw another end of water inlet hose on water inlet valve.
06