D-Link DIR-320 User Manual page 18

Section 3 – Configuration
Russia PPTP (Dual Access) - To configure the PPTP client connection,
enter the IP and account information for the router. Your ISP will give this
information to you if you are establishing a PPTP connection to the ISP.
Click Next to continue.
NOTE: The broadband device used for your Cable or ADSL network connection must support
PPTP pass-through so the VPN session can be established.
Russia PPPoE (Dual Access) - For PPPoE connections, select the
Address Mode Dynamic IP or Static IP, type in the Username and
Password used to identify and verify your account to the ISP. Retype the
password again and if necessary, type a Service Name or domain name.
For Static IP address mode, type the IP Address assigned to your
account. Your ISP should provide this IP address along with other account
information. An additional set of IP settings might be required to create a
static route to the ISP. Enter the WAN IP settings used to create this route
(as given by the ISP) and click Next to continue.
D-Link DIR-320 User Manual
15