Problem solving guide
With the aid of the following guide, minor problems can be easily corrected
without contacting Miele. This will save time and money.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Please note:
,
Installation work and repairs to electrical appliances must only be carried
out by a suitably qualified and competent person in strict accordance with
current local and national safety regulations. The manufacturer cannot be held
liable for unauthorised work.
Technical problems
Problem
The Start/Stop indicator
does not flash after the
dishwasher has been
switched on using the
On/Off button K.
The dishwasher stops
during a programme.
54
Possible cause
The appliance is not
plugged in.
The fuse is defective or
has tripped.
The fuse is defective or
has tripped.
Remedy
Insert the plug and switch
on at the socket.
Reset or replace the fuse
(Minimum fuse rating -
see data plate).
– Reset or replace the
fuse (Minimum fuse
rating - see data plate).
– If the same mains fuse
trips again, call Miele.