Remote Control Unit - Pioneer A-607R Service Manual

A-607R

8.3 REMOTE CONTROL UNIT

1
CD STANDBY/ON button
Switches CD player power STANDBY/ON.
2
AMP STANDBY/ON button
Switches the amplifier power STANDBY/ON.
3
TAPE SELECT button
Selects the cassette No. (1 to 6) for a multi-cassette changer.
4
DECK II button
To operate Deck II, press this button before pressing the oper-
ating buttons. Also, when using a single deck, press this button
before pressing the operating buttons.
5
DECK I button
To operate Deck I, press this button before pressing the operat-
ing buttons.
6
DISC SELECT button
Press this to select discs on a multi or twin tray compact disc
player.
7
Input selector buttons
Use to select the playback source.
CD : For compact disc playback with a CD player.
TUNER : For AM or FM broadcast reception with a tuner.
PHONO : For record playback with a turntable.
TAPE 1 : For playback with a cassette deck or MD recorder
connected to the TAPE 1/MD terminals.
TAPE 2 : For playback with a cassette deck or adaptor con-
nected to the TAPE 2 MONITOR terminals.
LINE : For playback with a component connected to the
LINE terminal.
28
1
2
STANDBY / ON
AMP CD TUNER
3
TAPE
2 7
SELECT
4
TAPE
1
DECK I DECK II
5
4 ¢ 7
CD
_
DISC
+
STATION
SELECT
6
CD TUNER PHONO
7
TAPE 1 TAPE 2 LINE
STEREO AMPLIFIER
REMOTE CONTROL UNIT
8
9
0
-
=
~
NOTE:
8
9
TAPE
3
0
¡
3
-
=
TUNER
+
~
VOLUME
Î
TUNER STANDBY/ON button
Switches TUNER power STANDBY/ON.
TAPE STANDBY/ON button
Switches the cassette deck power STANDBY/ON.
TAPE operation buttons
2, 3
: Playback in the direction of the arrows.
7
: Stop
1, ¡ : Tape fast forward/reverse.
CD player operation buttons
4
: Returns you to the start of the current track
(Track search).
¢
: Takes you to the start of the next track
(Track search).
7
: Stop
3
: Play
STATION +, – buttons (TUNER)
Calls each station number in sequence.
VOLUME +, – buttons
+
........................................................... Increases the volume.
–
......................................................... Decreases the volume.
When the accessory remote control unit is used to operate other
PIONEER components with the Î mark, it cannot be used to
operate functions which do not correspond to the functions listed
on the remote control unit.