Resetting The File Name; Protecting Files - JVC GR-D875U Instructions Manual


D.S.C. Recording & Playback
EN

Resetting The File Name

By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1 1
Perform steps –
Of Images" ( 25).
2
Press MENU.
3
Select "MEMORY CARD" ( ).
4
Select "NO.RESET", press SET. The NO.
RESET screen appears.
5
Select "EXECUTE", press SET. The new
folder (such as "101JVCGR") will be made
and the file name of the next shot starts
from DVC00001.
Note:
If the file name reaches DVC09999, a new folder
(such as "101JVCGR") will be made and the
file name will start again from DVC00001.

Protecting Files

The Protect mode helps prevent the accidental
erasure of files.
1 1
Perform steps –
Of Images" ( 25).
2
Press MENU.
3
Select "MEMORY CARD" ( ).
4
Select "PROTECT", press SET. The
PROTECT menu appears.
• Press £ whenever you want to return to the
previous menu screen.
To protect the currently displayed file
5
Select "CURRENT", press SET. The
PROTECT screen appears.
3
in "Normal Playback
3
in "Normal Playback
6
Press £ or ¤ to select the desired file.
7
Select "EXECUTE", press SET.
• To cancel protection, select "RETURN".
6
• Repeat steps
want to protect.
PROTECT
PROTECT?
EXECUTE
RETURN
To protect all files stored in the memory
card
5
Select "PROT.ALL", press SET. The
PROTECT screen appears.
6
Select "EXECUTE", press SET.
• To cancel protection, select "RETURN".
Note:
If the "x" mark appears, the currently displayed
file is protected.
To Remove Protection
Before doing the following, perform steps
1 4
– in "Protecting Files".
To remove protection from the currently
displayed file
5
Select "CURRENT", press SET. The
PROTECT screen appears.
6
Press £ or ¤ to select the desired file.
7
Select "EXECUTE", press SET.
• To cancel selection, select "RETURN".
6
• Repeat steps
remove protection.
want to
To remove protection from all files stored
in the memory card
5
Select "CANC.ALL", press SET. The
PROTECT screen appears.
6
Select "EXECUTE", press SET.
• To cancel selection, select "RETURN".
7
for all files you
and
7
and for all files you