MTD 260 Series Operator's Manual

22-inch string trimmer

Hide thumbs Also See for 260 Series:

Operator's manual (28 pages)

Illustrated parts list (12 pages)

Operator's manual (18 pages)

Table Of Contents

Table of Contents

Quick Links

Summary of Contents for MTD 260 Series

Page 1 READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY RESULT IN PERSONAL INJURY. MTD LLC, P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 Form No. 769-09065A (August 20, 2013)
Page 2: Table Of Contents
Visit us on the web at www.mtdproducts..com See How-to Maintenance and Parts Installation Videos at www.mtdparts.com/KnowledgeCenter ◊ Call a Customer Support Representative at (800) 800-7310 or (330) 220-4683 ◊ Write to MTD LLC • P.O. Box 361131 • Cleveland, OH • 44136-0019...
Page 3: Important Safe Operation Practices
Important Safe Operation Practices WARNING: This symbol points out important safety instructions which, if not followed, could endanger the personal safety and/or property of yourself and others. Read and follow all instructions in this manual before attempting to operate this machine. Failure to comply with these instructions may result in personal injury.
Page 4 Do not put hands or feet near or under rotating parts. Keep Muffler and engine become hot and can cause a burn. Do clear of discharge area at all times as the rotating spindle not touch. and trimmer lines can cause injury. Only use parts and accessories made for this machine by Never operate the string trimmer without proper shields, the manufacturer.
Page 5 Use extreme care when approaching blind corners, Before cleaning, repairing, or inspecting, make certain the doorways, shrubs, trees, or other objects that may obscure spindle and all moving parts have stopped. Disconnect the your vision of a child who may run into the string trimmer. spark plug wire and ground against the engine to prevent unintended starting.
Page 6 Notice Regarding Emissions Spark Arrestor Engines which are certified to comply with California and federal WARNING: This machine is equipped with an EPA emission regulations for SORE (Small Off Road Equipment) internal combustion engine and should not be used are certified to operate on regular unleaded gasoline, and on or near any unimproved forest-covered, brush may include the following emission control systems: Engine covered or grass-covered land unless the engine’s...
Page 7: Safety Symbols
Safety Symbols This page depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbol Description READ THE OPERATOR’S MANUAL(S) Read, understand, and follow all instructions in the manual(s) before attempting to assemble and operate EYE PROTECTION Always wear safety glasses or safety goggles when operating this machine.
Page 8 2 — i ection mportant peration racticeS...
Page 9: Assembly & Set-Up
Assembly & Set-Up Contents of Carton • One String Trimmer • One Bottle of Oil • One Pack of Trimmer Line • One String Trimmer Operator’s • One Engine Operator’s Manual Manual Assembly Move the upper handle into one of three positions by pivoting it forward or rearward.
Page 10: Starter Rope
Starter Rope Set-Up Disconnected the spark plug boot from the spark plug Gas and Oil Fill-Up (refer to the seperate Engine Manual). Refer to the separate engine owner’s manual for additional Pivot the control handle against the upper handle and pull engine information.
Page 11: Controls And Features
Controls and Features Control Lever Recoil Starter Flywheel Screen Trimmer Line Trimmer Deflector Spindle Figure 4-6 Recoil Starter Spindle The recoil starter is attached to the right side of the upper The spindle rotates the trimmer line. handle. Stand behind the unit and pull the recoil starter rope to Trimmer Line start the unit.
Page 12: Operation
Operation Adjusting the Spindle Height • Operate the string trimmer at a slower walking speed when trimming tall, thick weeds or grass. The spindle height can be adjusted for various applications. To • Clean the underside of the trimmer after each use to do so, proceed as follows: remove any debris build up.
Page 13: Maintenance & Adjustments
Maintenance & Adjustments Maintenance Deck Care Clean underside of the machine after each use to prevent build- General Recommendations up of grass clippings or other debris. Follow steps below:. • Always observe safety rules when performing any Disconnect spark plug wire. Drain gasoline from string maintenance.
Page 14: Troubleshooting
Troubleshooting Problem Cause Remedy Engine Fails to start 1. Control lever disengaged. 1. Engage control lever. 2. Spark plug boot disconnected. 2. Connect wire to spark boot. 3. Fuel tank empty or stale fuel. 3. Fill tank with clean, fresh gasoline. 4.
Page 15: Replacement Parts
Replacement Parts Component Part Number and Description 951-14437 Spark Plug 951-10298 Air Cleaner Kit 951-14407 Fuel Cap Assembly 951-10358A Fuel Filter 746-05141 Control Cable, 48” 734-04030 Wheel 731-2315 Deflector Flap 731-2329 Trail Shield 490-040-M035 .155” Trimmer Line (Ten-pack) (800) 800-7310 or (330) 220-4683 Phone to order replacement parts or a complete Parts Manual (have your full model number and serial number ready).
Page 16: Warranty
MANUFACTURER’S LIMITED WARRANTY FOR The limited warranty set forth below is given by MTD LLC with Routine maintenance items such as lubricants, filters, blade respect to new merchandise purchased and used in the United sharpening, tune-ups, brake adjustments, clutch adjustments,...

This manual is also suitable for:

Series 260

MTD 260 Series Operator's Manual

Quick Links

Related Manuals for MTD 260 Series

Summary of Contents for MTD 260 Series

This manual is also suitable for:

Table of Contents