Table of Contents
Advertisement
RECORDING
Advanced Features
DISPLAY
LCD monitor
or viewfinder
DEC 25. 96
Date display
Date/Time-off mode
Date display
Time display
DEC 25. 96
Date/Time display
DEC 25. 96
QUICK REC
Date/Time Insert
This feature allows you to display the date and time in your
viewfinder or the LCD monitor and on a connected TV.
NOTE:
You should already have performed the Date/Time
Setting procedure (
before continuing.
DISPLAY
CHOOSE DISPLAY MODE
1
Press DISPLAY during Record–Standby to cycle
through the available modes as shown in the
illustration at left.
NOTES:
The selected display can be recorded.
If you don't want to record the display, select Date-off
PM 3:29:43
mode before shooting.
If you want to delete the display during shooting, press
Time display
DISPLAY.
If you want to call back a deleted display, engage the
Record-Standby mode and then press DISPLAY to
Date/Time display
select the desired display mode.
PM 10: 59:20
PM 10: 59:20
Quick Rec
Records a scene for 5 seconds, providing quick scene
transitions like those seen in TV programmes.
1
During Record–Standby, press and release QUICK
REC. Recording starts, and after 5-second
recording is finished, the camcorder reenters the
Record–Standby mode automatically.
•To continue shooting longer than 5 seconds,
NOTES:
The Fader (
QUICK REC.
QUICK REC cannot be used during Animation and
Time-Lapse (
pg. 11). If you haven't, do so
press and hold QUICK REC. Recording continues
as long as QUICK REC is kept pressed.
pg. 28) cannot be activated by pressing
pg. 35, 36).
21
Hide quick links:
Advertisement
Table of Contents
