PVHFL58-300 & PVHFL510-300 Horizontal Power Vent
Installing the power vent
Outer Can
Assembly
Wall Board
Figure 2. Framing dimensions
Step 1: Unpack power vent from box. Remove two screws from bottom of the
door. Hold louver assembly securely so it does not fall.
Figure 3.
Page 4
Installation
3
18
"
4
476
Framing
1
22
4
565
Step 2: Remove the louver assembly by lifting the bottom end forward and
then dropping the door out of the top latches.
"
Figure 3a.
Step 3: To remove the inner can from the outer can remove the 8 screws on
the back of the termination.
Figure 3b.
XG0519 - 070714