Inst Installa Alla Allation Tion Tion; Removing The Base Stand; Mounting On The Wall - TruTech PVS31170S1 User Manual

REMOVING THE BASE ST REMOVING THE BASE ST

REMOVING THE BASE STAND

REMOVING THE BASE ST REMOVING THE BASE ST
WARNING: The LCD Display is very fragile, and must be protected at all WARNING: WARNING:
WARNING: WARNING:
times when removing the base stand. Be sure that nothing hard or sharp,
or anything that could scratch or damage the LCD display, come in contact
with it. Do NOT place pressure on the front of the unit at any time because the
screen could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a flat surface, so the back side is facing up, making
sure to place a soft cushioned material (such as a pillow or thick piece
of foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the unit.

MOUNTING ON THE WALL

MOUNTING ON THE WALL
MOUNTING ON THE WALL MOUNTING ON THE WALL MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-
compliant 3.9" x 3.9" (100mm x 100mm) mounting kit designed for flat-
panel TVs (sold separately). Mount this unit according to the directions
included with the mounting kit.
Note: Note:
Note: Note: You must remove the base stand before mounting the unit on the wall. Note:
18
3.9"
Four
mounting
holes
INST INST ALLA INST
INST INST
AND AND
AND AND
ALLA ALLA TION ALLA TION TION TION
ALLA TION