Applications - Clarion APX2180 Owner's Manual

Applications
Mono subwoofer system (APX2180 and APX4360)
In this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Stereo Amp configuration (APX2180)
Set crossover mode to LP
Set input mode switch to
L + R
(Mono)
• Set crossover frequency to -80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 4Q
min
Stereo Amp configuration (APX4360)
• Set rear crossover mode to LP
• Set input mode switch to
L + R
(Mono)
+.
Set crossover frequency to -80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 4Q
min
Note:
You may bridge the front, rear or both pairs of channels using the above
settings.
APXlDPX Amplifiers
15
Applications
Mono subwoofer system (APX2180 and APX4360)
In this application, the rear channels are bridged for mono operation to drive a
subwoofer while the front channels are available to drive a set of full-range speakers.
Stereo Amp configuration (APX2180)
Set crossover mode to LP
Set input mode switch to
L + R
(Mono)
• Set crossover frequency to -80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 4Q
min
Stereo Amp configuration (APX4360)
• Set rear crossover mode to LP
• Set input mode switch to
L + R
(Mono)
+.
Set crossover frequency to -80Hz
• Fine-tune crossover frequency to suit
musical tastes and performances
• 4Q
min
Note:
You may bridge the front, rear or both pairs of channels using the above
settings.
APXlDPX Amplifiers
15