Fast Preheating - Whirlpool Built in oven User Manual

2. To browse the various possibilities, press buttons
white in the centre of the screen.
N.B.: for the list and description of functions, see the specific table at page 18 and at page 23.
If the induction plate is already properly engaged or whenever the induction plate is inserted,
only Induction Functions and Settings will be accessible through the main menu.
If the induction plate is not engaged into the oven, both standard functions MENU and
induction functions MENU will be accessible.
When the induction plate is inserted or removed, a message indicating correct engagement/
disengagement will be shown on the display.
3. Select the function by pressing button
pre-set values are those desired, press the start button
change them.
SETTING THE TEMPERATURE/OUTPUT OF THE GRILL (Standard Functions only)
200°C --:--
TEMPERATURE COOK TIME
Forced Air
No --:--
END TIME
PREHEAT
To change the temperature or output of the grill, proceed as follows:
1. Check that the cursor is positioned next to the temperature value (zone 1); press button
the parameter to be changed: the temperature values flash.
2. Use buttons
3. Press button to confirm and then press
placed on.
4. Press to start cooking.
The set temperature can also be changed during cooking by following the same procedure.
5. At the end of cooking, the end of cooking message is displayed. At this point the oven can be
switched off by pressing
display shows the cooling bar which indicates the temperature inside the oven.
Note: in induction mode temperature will be automatically adjusted by the oven and does not need
to be manually set.
PREHEATING THE OVEN (Standard Functions Only)
180°C --:--
TEMPERATURE COOK TIME
Forced Air
No --:--
PREHEAT END TIME
If you wish to preheat the oven before inserting food, change the oven's default selection as follows:
1. Using buttons
2. Press button to select the setting: "No" flashes on the display.
3. To change the setting, press
4. To confirm your choice, press button
Note: in induction mode, preheating is not required. Induction mode requires all cooking operations
to have a cold start.
FAST PREHEATING (Standard Functions Only)
180°C - 00:02
TEMPERATURE INSERT IN

Fast Preheating

If you wish to preheat the oven quickly before inserting food, change the oven's default selection as
follows:
1. Select the fast preheating function using buttons
180°C
TEMPERATURE
Forced Air
No
PREHEAT
to change to the desired value.
, or cooking can be prolonged by pressing
180°C
TEMPERATURE
Forced Air
No
PREHEAT
and , move the cursor to preheating.
or : the display shows "Yes".
.
180°C
TEMPERATURE
Preheating
: the selectable function is highlighted in
: the cooking settings are displayed on the screen. If the
, otherwise proceed as indicated above to
--:--
COOK TIME
--:--
END TIME
. The display indicates which shelf food should be
--:-- 180°C
COOK TIME TEMPERATURE
Forced Air
--:-- Yes
END TIME PREHEAT
- 00:02 180°C
INSERT IN TEMPERATURE
Oven is Hot!
.
EN14
Insert food on level 3
Press when done
. When switched off, the
--:--
COOK TIME
--:--
END TIME
- 00:02
INSERT IN
to select