Red-Eye Correction; Changing Movie Image Quality - Canon Powershot SX520 HS User Manual

Red-Eye Correction

Red-eye that occurs in flash photography can be automatically corrected
as follows.
1
Access the [Flash Settings] screen.
●
Press the [
Settings] on the [
the [ ] button ( = 27).
2
Configure the setting.
●
Choose [Red-Eye Corr.], and then
choose [On] ( = 27).
●
Once the setting is complete, [
displayed.
●
To restore the original setting, repeat this
process but choose [Off].
●
Red-eye correction may be applied to image areas other than
eyes (if the camera misinterprets red eye makeup as red pupils,
for example).
You can also correct existing images ( = 91).
●
● You can also access the screen in step 2 when the flash is up by
pressing the [ ] button and immediately pressing the [
button.

Changing Movie Image Quality

Still Images Movies
3 image quality settings are available. For guidelines on the maximum
movie length at each level of image quality that will fit on a memory card,
see "Recording Time per Memory Card" ( = 135).
] button, choose [Flash
] tab, and then press
Image
Quality
] is
]
Still Images
●
Press the [ ] button, choose [
menu, and choose the desired option
( = 26).
● The option you configured is now
displayed.
●
To restore the original setting, repeat this
process but choose [
Resolution Frame Rate
1920 x 1080 30 fps For shooting in Full HD
1280 x 720 30 fps For shooting in HD
For shooting in standard
640 x 480 30 fps
definition
●
In [ ] and [ ] modes, black bars displayed on the top and
bottom edges of the screen indicate image areas not recorded.
Before Use
Basic Guide
Movies
Advanced Guide
1
Camera Basics
] in the
2
Auto Mode /
Hybrid Auto Mode
3
Other Shooting Modes
4
P Mode
].
5
Tv, Av, and M Mode
6
Playback Mode
7
Setting Menu
8
Accessories
Details
9
Appendix
Index
43