Raid Configuration Utility Selection (3-Pin Raid_Sel1); Pmbus 1.2 Psu Select Jumper (3-Pin Smart_Psu1) - Asus Z10PA-D8 Series User Manual

6.

RAID configuration utility selection (3-pin RAID_SEL1)

This jumper allows you to select the RAID configuration utility to use when you create
disk arrays. Place the jumper caps over pins 1–2 to use the third party software LSI
MegaRAID software RAID Configuration Utility; otherwise, place the jumper caps to
pins 2–3 to use the Intel
Utility.
The RAID configuration utility selection is available to Z10PA-D8 SKU only.
7.

PMBus 1.2 PSU select jumper (3-pin SMART_PSU1)

This jumper allows you to select PSU PMBus version. Set to pins 1–2 for PMBus, set
to pins 2–3 for others.
2-28
®
Rapid Storage Technology enterprise SATA Option ROM
Chapter 2: Hardware information