Suzuki DL650A Owner's Manual page 90

 WARNING
Replacing only one or the two
brake pads can result in
uneven braking action.
Replace both pads together.
Rear Brake Adjustment
The rear brake pedal must be
adjusted to set the clearance
between the pedal and the foot-
rest. Adjust the brake pedal as fol-
lows:
1. Loosen the lock nut 1, and
turn the push rod 2 to locate
the pedal 15 – 25 mm (0.6 –
1.0 in) below the top face of
the foot rest.
2. Retighten the lock nut 1 to
lock the push rod 2 in the
proper position.
15 – 25 mm
(0.6 – 1.0 in)
CAUTION
An incorrectly adjusted brake
pedal may force brake pads to
rub against the disk at all
times, causing damage to the
pads and disk.
Follow the steps in this section
to adjust the brake pedal prop-
erly.
Rear Brake Light Switch
To adjust the brake light switch,
hold the switch body and turn the
adjuster so that the brake light will
come on just before a pressure
rise is felt when the brake pedal is
depressed.
7-32