Wolf Gas Ranges Installation Manual page 4

SPECIFICATIONS
Electrical
Installation must comply with all applicable electrical codes.
Locate the electrical supply flush with the wall or floor and
within the shaded area shown in the illustration on the fol-
lowing pages. A separate circuit, servicing only this appli-
ance is required. A ground fault circuit interrupter (GFCI) is
not recommended and may cause interruption of operation.
ELECTRICAL REQUIREMENTS
Electrical Supply
Service
Receptacle
Power Cord
|
4 Wolf Customer Care 800.222.7820
grounded, 110/120 VAC, 60 Hz
15 amp dedicated circuit
3-prong grounding-type
6'
(1.8 m)