Canon Camera Hackers Manual page 236

227
7.9 Scripting
equal_step_focus_bracketing
Sets up the camera for a focus bracketing sequence, but with fixed focus steps begin-
ning at a start subject distance. This is typically used for focus stacking in macro
mode. Cameras with manual focus must be in manual focus mode. Also, the Custom
Timer or the Continuous Shooting mode must be active.
set_focus_step_to
Sets the size of the focus step used by the command equal_step_focus_bracketing.
digiscope_bracketing
Enters the bracketing mode for Digiscope mode (section 7.8). The camera will focus
before and behind the virtual image of the scope. Cameras with manual focus must
be in manual focusing mode. Also, the Custom Timer or the Continuous Shooting
mode must be active.
number_of_images_to_capture_is n
Specifies the number of images in bracketing mode.
start_continuous_sequence
end_continuous_sequence
Starts and ends a bracketing series when the camera is in Continuous mode.
start_custom_timer_sequence
Starts a Tv or focus bracketing series when the camera is in Custom Timer mode. The
series will end after a given number of images have been taken. The number of im-
ages is specified in the Custom Timer under Shots.
bracketing_done r
Returns 1 when the bracketing series is complete.
wait_until_done
Waits until a series of photos taken with the Custom Timer or under the Continuous
mode has been completed.
Time-related commands
sleep_for t
sleep_for_msecs t
Identical to sleep (section 5.5.7).
sleep_for_seconds s
Equivalent to sleep s*1000
sleep_for_minutes m
Equivalent to sleep m*60000