Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK A531 Operating Manual

Attaching the cover

► Place the cover in the correct mounting position (1).
If you remove more than one component at the same time, keep the screws for the
individual components separately from each other and make sure that you use the
correct screws. If you install the wrong screws, components may be damaged.
► Tighten the screws (2).
► Insert the battery (see Chapter

Finishing component removal

After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
Fujitsu Technology Solutions
Removing and installing components during servicing
2
2
1
"Inserting battery", Page
"Inserting battery", Page
33).
33).
59