Programmes; Washing; Individual Settings; Switching Off - Bosch Washing machine Instruction Manual

run a wash cycle with no laundry in the machine

Sorting and loading laundry

Follow the manufacturer's care information!
Sort laundry according to the label's indications.
And according to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe important information!
Wash laundry of different sizes in the same wash programme.
Close the door. Take care not to trap items of laundry between the washing machine door and
Add detergent and care products
amount of laundry, soiling, water hardness (ask your water supply company) and
For models without insert for liquid detergent:
Pour liquid detergent into the appropriate dispenser and place in the drum.
Dilute viscous fabric softener and fabric conditioner with water.
This prevents blockages.
Setting** and adjusting programmes
me selector Start /
Reload
cold)
nding on the model) or (without final spin,
ng water, display panel - - - )
s:
duration or end (-0-)
oor, reload laundry pages 4, 5
Before the first wash,
Page 9.
Page 7.
Page 6
seal.
Measure detergent according:
manufacturer's instructions.
1
**If the symbol flashes in the
display panel, the childproof lock is
active Deactivate childproof lock,
page 5.
Additional functions and option
buttons

Individual settings,

page 5.
Press Start/Reload 2
All buttons are sensitive and need
only to be touched lightly. Press and
hold the (Ready in) option button
for an automatic run through all
setting options.
Programme selector for
switching the machine on
and off and for selecting the
programme. Can be turned
in either direction.

Washing

Detergent drawer with
compartments I, II,
Drum
Control panel
Door
Service door
Washing
3 3 3
Removing the washing
Open the washing machine door and remove the washing.
If (without final spin) is active: turn the programme selector to
Empty or select the spin speed.
Choose Start/Reload.
– Remove any foreign objects. Risk of rusting.
– Leave the washing machine door and detergent door open
so that any residual water can evaporate.
Turn the tap off
Not required for Aqua-Stop models Refer to Installation instructions.

Switching off

Turn the programme selector to Off.
End of programme when ...
... Start/Reload flashes and - - appears on the display panel.
Note: If display panel lighting is switched off, press any button
saving mode, page 5.
Interrupting the programme
Programmes at high temperatures:
3
– Cool washing: Select Rinse / Spin.
– Press Start/Reload.
Programmes at lower temperatures:
– Select Rinse / Spin (deactivate
Empty.
– Press Start/Reload.
Changing the programme if ...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Press Start/Reload. The new programme starts from the beginning.
Reloading laundry if ...
... Press Start/Reload; both the symbols
display panel. If is lit, the washing machine door cannot be opened.
Press Start/Reload.
Energy
(Extra rinse) button) or
page 5
+
are displayed on the
4 4 4