Removal From Storage - Honda Goldwing GL1800 Owner's Manual

Honda motor goldwing gl1800 motorcycles owner's manual    
Hide thumbs Also See for Goldwing GL1800:
Table of Contents

Advertisement

Pour a tablespoon (15 20 cc) of clean engine oil into each cylinder and
cover the spark plug holes with a piece of cloth.
With the engine stop switch in the RUN position, press the start button
several times to crank the engine and distribute the oil.
Reinstall the spark plugs and spark plug caps.
5.
Remove the battery and charge it fully. Store it in an area protected from
freezing temperatures and direct sunlight. Slow charge the battery (page
161
) once a month.
6.
Wash and dry your motorcycle. Wax all painted surfaces. Apply rust-
inhibiting oil to the chrome pieces.
7.
Inflate the tires to their recommended pressures (page
8.
Store your motorcycle in an unheated area, free of dampness, away from
sunlight, with a minimum of daily temperature variation.
9.
Cover your motorcycle with a porous material. Avoid using plastic or similar
non-breathing, coated materials that restrict air flow and allow heat and
moisture to accumulate.

Removal from Storage

Refer to
Saf ety Precautions
1.
Uncover and clean your motorcycle.
2.
If your motorcycle has been stored for more than four months –– change the
engine oil (page
3.
If your motorcycle has been stored for more than two months –– ask your
Honda dealer to drain and replace the fuel.
4.
Charge the battery (page
5.
Perform a pre-ride inspection (page
low speeds.
on page
106
130
).
161
) as required. Install the battery.
Storing Your Honda
153
.
41
), then test-ride your motorcycle at
).
169
Tips

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents