Yamaha FZ6-SS Service Manual page 117

CHANGING THE COOLANT
S Use only distilled water. However, if dis-
tilled water is not available, soft water may
be used.
S If coolant comes into contact with painted
surfaces, immediately wash them with wa-
ter.
S Do not mix different types of antifreeze.
13. Install:
S radiator cap
14. Fill:
S coolant reservoir tank
(with the recommended coolant to the maxi-
mum level mark a )
15. Install:
S coolant reservoir cap
16. Start the engine, warm it up for several min-
utes, and then stop it.
17. Check:
S coolant level
Refer to "CHECKING THE COOLANT LEV-
EL".
NOTE:
Before checking the coolant level, wait a few
minutes until the coolant has settled.
18. Install:
S fuel tank
Refer to "FUEL TANK".
S front cowling inner panel (left and right)
Refer to "COWLINGS".
S seat
Refer to "SEAT".
3-40
CHK
ADJ