Kubota GL6000-STD Operator's Manual page 2

Diesel generators
Hide thumbs Also See for GL6000-STD:
Table of Contents

Advertisement

3
To prevent electrical shock the following instruction must be followed.
Before the generator can be connected to a building's electrical
system, a licensed electrician must install an isolation (transfer) switch
in the building's main fuse box. The switch is the connection point for
generator power and allows selection of generator or main line power
to the building.
This will prevent the generator from charging the main power line
(backfeeding) when the main power supply has failed or has been
turned off for line repair. Backfeeding can electrocute or injure line
maintenance personnel. Also, generator and building electrical system
damage can occur when normal operating power returns if unit is used
without an isolation switch.
Engine exhaust, some of its constituents,
certain vehicle components and fluids,
contain or emit chemicals known to the
State of California to cause cancer and birth
defects or other reproductive harm.
The engine in this machine is not equipped by the manufacture with
a standard spark arrester.
It is a violation of California Public Resource Code Section 4442 to
use or operate this engine on or near any forest-covered, brush-
covered land, or grass- covered land unless the exhaust system is
equipped with a working spark arrester meeting state laws. Other
states or federal areas may have similar laws.
WARNING
WARNING
California Proposition 65
WARNING
IMPORTANT

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents