Initial Setting - Mitsubishi Electric GB-50A Installation Manual

7

Initial Setting

Initial setting steps
Step 1: IP address setting
Step 2: License number registration
Step 3: Group setting
Step 4: Other settings
Step 5: Test run
Note
● Initial setting can be set with either the initial setting tool or the initial setting web through LAN. More
functions can be set with the initial setting web. The license is not registered at factory shipment,
and monitor or operation cannot be performed on the air conditioner.
In this section, the functions that can be initialized using this unit are described. Refer to the
operation manuals for the initial setting tool or the initial setting web for more information.
● The format in which the Web page address for each GB-50A is expressed on the Initial Setting
Web, as well as the default setting user name and password are shown below.
User
Maintenance user
The function list of GB-50A main body, the Initial Setting Tool, and the Initial Setting Web is shown below.
Items
M-NET address setting
IP address setting
Function selection
Group registration
Registration of interlocked
operation with the
ventilation unit
Service switch
Other settings
http:// [IP address of the GB-50A]/g-50/ administrator.html
Note: For example, type "http://192.168.1.1/g-50/administrator.html" if the GB-50A IP
address is [192.168.1.1].
Default
user name
initial
This unit
√
(simple setting)
√
*License must be registered before use.
Default
password
init
Initial Initial Setting
Setting Tool Web
√ √
√ √
√ √
√ √
√ √
√ √
13
Remarks
The default value is 0.
*The settings of the simple setting
have the priority over other settings.
Presence/absence of K transmission
converter connection, local operation
prohibition setting, and external input
mode
Available functions vary depending on
the tool.