Raymarine e7 Installation Instructions Manual page 82

Example misaligned radar
1
Item Description
1 Target object (such as a buoy) dead ahead.
2 Target displayed on the radar display is not aligned with the
Ship's Heading Marker (SHM). Bearing alignment is required.
82
Checking the bearing alignment
1. With your vessel under way: Align the bow with a stationary
object identified on the radar display An object between 1 & 2
2
NM distant is ideal.
2. Note the position of the object on the radar display. If the target
is not under the ships heading marker (SHM), there is an
alignment error and you will need to carry out bearing alignment
adjustment.
Adjusting the bearing alignment
Once you have checked the bearing alignment you can proceed and
make any required adjustments.
With the radar application displayed:
1. Press the MENU button.
2. Select Set-Up .
3. Select Advanced.
4. Select Bearing Alignment.
5. Use the rotary control to place the selected target under the
Ship's Heading Marker.
6. Press OK when complete.
D11590-2
e7 / e7D — Installation instructions