Dukane 8755K-RJ User Manual page 13

Setting up
Connecting with your devices (continued)
• If you insert a USB storage device, such as a USB memory, into the USB TYPE
A port and select the port as the input source, you can view images stored in the
device (73).
• You can connect a dynamic microphone to the MIC port with a 3.5 mm mini-plug.
In that case, the built-in speaker outputs the sound from the microphone, even
while the sound from the projector is output. You can input line level signal to the
MIC port from equipment such as wireless microphone. Select HIGH in the MIC
LEVEL item of the AUDIO menu when you input line level audio signal to the
MIC port. The volume of the microphone and that of the sound from the projector
can be controlled separately except for the standby mode. However, if you mute
the sound from the projector, the sound from the microphone is also muted.
Microphone system
USB storage
device
USB
TYPE A
DC5V 0.5A
CAUTION
projector, be sure to use the REMOVE USB function on the thumbnail screen to
secure your data (76).
NOTE
• If a loud feedback noise is produced from the speaker, move the
microphone away from the speaker.
• This projector doesn't support plug-in power for the microphone.
(continued on next page)
12
HDMI
USB
TYPE B
LAN
MIC
AUDIO
L
IN1
IN3
IN2
R
►Before removing the USB storage device from the port of the
Speakers
(with an amplifier)
R L
COMPUTER IN1
VIDEO
Cr/Pr S-VIDEO
L
Cb/Pb
OUT
R
Y
Monitor
RGB IN
COMPUTER
IN2
MONITOR OUT
CONTROL