To Change Service Mode On The Hybrid Amplifier - Cisco Prisma II Hybrid Amplifier Installation Manual

To Change Service Mode on the Hybrid Amplifier

Complete the following steps to change the module Service mode.
1 From the MAIN menu, press the
Press the
2
Press the
3
4 Press the
5 Press the
confirm that the change was accepted.
6 Press the
78-4025693-01 Rev D
key or the key to scroll to Service.
key to select the Service.
key or the key to change the service to On or Off.
key to apply the change. The message "Data Saved" appears to
key to continue.
Configuring the Module using the ICIM
key.
83