GreatCall Jitterbug How-To Manual page 131

8. Press the button on your Jitterbug to begin searching for the Bluetooth headset.
Please wait while your Jitterbug searches for the Bluetooth headset. During this
time, "Searching" will appear on the Inside Display.
9. I f you are using the Samsung WEP 470, use the "Up/Down"
the options until "Samsung WEP 470" is highlighted in gray in the middle of the Inside
Display of your Jitterbug.
10. Press the button on your Jitterbug to select the "Samsung WEP 470."
11. Y ou will then be asked to enter the PIN number for the Samsung WEP 470. Enter the
following numbers and press the
12. You will see the message "Pairing Device Samsung WEP 470" on the Inside Display
of your Jitterbug.
120 Bluetooth
button.
PIN number = 0000
button and scroll through