Honda TRX420TM Owner's Manual page 25

Indicators & Displays
The indicators are identified in the table on page 16 with the words:
Lamp Check.
When applicable, the reverse or neutral indicators come on when you
turn the ignition switch ON ( ) and remain on until you shift out of
reverse or neutral.
TRX420FM only:
When applicable, the 4WD indicator comes on when you turn the
ignition switch ON ( ) and remains on until you shift out of 4WD
mode.
If one of these indicators does not come on when it should, have your
Honda dealer check for problems.
Display Check
When the ignition switch is turned ON ( ), the multi-function display
( ) will temporarily show all the modes and digital segments so you can 1
make sure the liquid crystal display is functioning properly.
The displays are identified in the table on page 17 with the words:
Display Check.
If any part of these displays does not come on when it should, have your
Honda dealer check for problems.
(1)
(1) multi-function display
Instruments & Controls
15