Porsche Cayenne Owner's Manual page 328

4.Screw filler hose B onto the filler bottle.
The filler bottle is now open.
5.Unscrew valve cap from tire valve F.
6.Remove valve insert E from the tire valve with
valve turner D.
Keep the valve insert in a clean and dry place.
7.Remove plug C of the filler hose B.
8.Push filler hose onto the tire valve.
9.Hold filler bottle higher than the level of the tire
valve and press it together forcefully until the
bottle is completely emptied into the tire.
10.Pull filler hose off the tire valve.
11.Twist the valve insert firmly into the tire valve
using the valve turner.
12.Inflate the tire.
Set the prescribed tire pressure.
Please observe the chapter "TIRE PRESSU-
RES, COLD" on Page 391.
13.Screw valve cap onto the tire valve.
14.Check the tire pressure after driving for around
10 minutes.
If the tire pressure is less than 22 psi (1.5 bar),
do not continue driving.
If a value of more than 22 psi (1.5 bar) is indi-
cated, correct the pressure to the prescribed
value.
328
Minor Repairs
15.Please consult your authorized Porsche
dealer.
The settings for Tire Pressure Monitoring must be
update on the multi-purpose display after filling the
tire with sealant.
To do this: Please observe the chapter "SETTING
TIRE SEALANT/SEALING SET" on Page 159.
Car care instruction
After drying, any sealant that emerges can be
peeled off like a film.
Warning!
Risk of accident, resulting in serious per-
sonal injury or death.
f Have the tire replaced by a specialist work-
shop as soon as possible.
f Avoid hard acceleration and high cornering
speeds.
f Do not exceed maximum speed of 50 mph
(80 km/h).
f Please always observe the safety and operat-
ing instructions, which can be found in the sep-
arate operating instructions for the sealant and
on the compressor.