The Control Panel; Programme Selector Dial - John Lewis JLWM 1203 Instruction Manual

1200 spin washing machine
Hide thumbs Also See for JLWM 1203:
Table of Contents

Advertisement

The control panel

1 Detergent dispenser drawer

2 Programme selector dial

The programme selector dial is divided into the
following sections:
Cottons
• Synthetics
• Delicates
• Wool
/
Hand washing
• Special programmes from "Soak" to "30 Minute
wash"
• Reset/Off programme Off
The selector dial can be turned either clockwise or
anticlockwise.
"Economy" position corresponds to an ENERGY
SAVING programme and "Cold" to a cold wash.
Before setting the dial to any position ensure that the
machine is turned to the "Off" position.
Important!
At the end of the programme the selector dial
must be turned to position "Off", to switch the
machine off.
Attention!
If you turn the programme selector dial to another
programme when the machine is working, the red
Start/Pause pilot light will flash 3 times and the
message Err is displayed on the display to indicate a
wrong selection. The machine will not perform the
new selected programme.
3 "Spin" button
Press this button repeatedly to change the spin speed
or to select position "None" (no spin), if you want
your laundry to be spun at a speed different from the
one proposed by the washing machine. The relevant
light will light up.
Spin speed
The following speeds are available for the different
fabrics:
• Cottons, linen:
500/700/900 max 1200 r.p.m. ;
• Synthetics and Wool/Hand wash:
500/700 max 900 r.p.m.;
• Delicates and " 30 Minute wash " :
500 max 700 r.p.m.
Position "None"
By selecting the option "None" all the spinning phases
are cancelled and the last rinse water is drained.
If you select this option with programmes for cotton,
synthetics and delicates, the machine will perform
some extra rinses.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents