2.3
Firmware update and IP configuration
You need to update the ASMB7-iKVM firmware and configure IP source before
you start using the ASMB7-iKVM board.
2.3.1
Firmware update
To update the firmware:
1.
Insert the support CD into the optical drive.
2.
Restart the remote server, then press <Del> during POST to enter the BIOS
setup.
3.
Go to Boot menu and set the Boot Device Priority item to [CD-ROM].
4.
When finished, press <F10> to save your changes and exit the BIOS setup.
On reboot, the main menu appears. Select ASMB7-iKVM Firmware Update
5.
for Clear Configuration, and press <Enter> to enter the sub-menu.
6.
A confirmation message appears, asking whether you want to update the
firmware or not. Select <Yes> to update.
WARNING !!!
UPDATE ASMB7 FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
The firmware updating process starts.
2-4
No
Yes
Chapter 2: Installation