Door Seal; Cleaning The Pump - John Lewis JLWM 1404 Instruction Manual

Important! Do not clean the drum with
acidic descaling agents, scouring agents
containing chlorine or iron or steel wool.
1. Remove any rust deposits on the drum
with a cleaning agent for stainless steel.
2. Run a washing cycle without any
washing to clean off any cleaning agent
residues.
Programme: Short Cotton Programme
at maximum temperature and add
approx. 1/4 measuring cup of
detergent.

Door seal

Check from time to time the door seal and
possible objects that could be trapped in the
fold.

Cleaning the pump

The pump should be inspected regularly and
particularly if:
• the appliance does not empty and/or
spin;
• the appliance makes an unusual noise
during draining due to objects such as
safety pins, coins etc. blocking the pump.
• a problem with water draining is detected
(see chapter "What to do if..." for more
details).
Warning! Before opening the pump
door, switch the appliance off and
remove the mains plug from the
socket.
Proceed as follows:
1. Unplug the appliance.
2. If it is necessary, wait until the water has
cooled down.
3. Open the pump door levering on the
groove with a coin (or with the suitable
tool, that you can find in the bag
containing the instruction booklet
depending on the model).
4. Place a container close to the pump to
collect any spillage.
5.
6. Pull out the emergency emptying cap
from the filter cover, using pliers.
24
1
2