John Lewis JLWM1202 Instruction Manual page 14

• An alarm code indicates a fault in the machine
operation (see the relevant chapter).
8 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried out
will remain lit.
When the programme has finished, the "End" light
comes on.
The "End" pilot light flashes in the event of operating
problems. And the relative alarm code appears on the
display.
E E 1 1 0 0
= the machine does not fill
E E 2 2 0 0
= the machine does not empty
E E 4 4 0 0
= the door has not been closed
To eliminate the problem, see paragraph "Something
not working" (pages 25-26).
ATTENTION!
If you turn the programme selector dial to another
programme when the machine is working, all the lights
of the programme progress display will flash for about 2
seconds but the washing machine will not perform the
new selected programme.
14