Honda GL1800 Setup Instructions page 9

2005 GL1800/A
7. Install the windshield (cont.).
Assemble the center adjustment plate and
backup plate onto the windshield using a
6 x 8 mm screw.
Set the windshield in place on the fairing
and begin the installation by installing the
two 6 x 11 mm special screws in the center
adjustment plate.
Place an 8 mm nylon washer on both
6 x 12 mm special screws. Install the outer
adjustment plates and attach them using
the special screws and washers.
6
ADJUSTMENT
PLATE
SPECIAL
SCREWS
ADJUSTMENT
PLATE and
6 x12 mm
SPECIAL SCREWS
©2004 American Honda Motor Co., Inc. - All Rights Reserved
6 x 8 mm
SCREW
BACK UP
PLATE