Removing And Installing The Side Window - Geo Tracker 1995 Owner's Manual

Removing and Installing the Side Window
To
remove the side window:
1. Unfasten the Velcro@
on the top and rear ends of the
side window.
2. Unzip the zipper almost all the way, leaving about
three inches of it still zipped and unfasten the
Velcro on the inside of the window.
3. Unclip the retainer strips on the lower and front
edges of the window (see illustration), starting at the
lower, right corner.
4. Unzip the zipper the rest of the way and remove the
side window.
Reverse the steps to install the side window.
You may want to place the rear bottom corner of the
window inside the rear part of the vehicle body to help
you engage the zipper end.