Channel Menu - VIORE LC37VF80 Operating Instructions Manual

OSD Menu

6. Channel menu

Description
Air/Cable: Allow you to select antenna between Air and Cable.
If you selet "Cable", the following items(Favorite, Show/Hide, Channel NO, Channel Label and
DTV Signal) are unable to use.
Auto Scan: Enter the Auto Scan menu to start auto scan.
If you select "Cable" as input signal in Antenna item, allows
you to select Cable System among: Auto, STD, IRC and HRC.
Use button to highlight the "Start to Scan", then press
button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
If you select "Air" as input signal in Antenna item, you
can press button to search the channels automatically.
The receivable channels will be stored automatically.
When searching channels, press MENU to stop.
NOTE: It will take a while to auto scan in NTSC or ATSC
mode, please wait patiently.
Favorite: Allow you to add these channels which you desired
as the favorite channels.
Use / button to highlight the desired item, then press
OK button to add or remove the highlighted channel as
favorite.
OSD Menu
16