Safety Standards - Xerox PHASER 4400 Service Manual

Safety Standards

Phaser 4400 satisfies the following safety standards:
Category
Laser Safety
Ozone Density
Other standards
Phaser 4400 Laser Printer Service Manual
Standard Satisfied
100 V/120 V type is submitted to FDA 21 CFR
(Chapter 1, Subchapter J, Section 1010/1040).
220 V/240 V type is submitted to IEC 825 Class 1
Laser Product.
Does not exceed 0.02 ppm of ozone density TWA
(Time Weight Average), measured according to ECMA
129 standard
100 V/120 V type satisfies:
UL 1950 3rd Edition, CSA C22.2 no. 950-M95 or
equivalent, NOM
200 V/220 V satisfies:
IEC 950 including amendments 1,2,3 and 4, CE
Directive 1, Nordic and other Agency Approval 2, CCIB
Notes:
1. When the controller is installed, the OEM customer
shall be responsible for the submittal of CE and CCIB.
2. The OEM customer shall be responsible for the
Nordic agency approvals including NEMKO, SEMKO,
SETI and DEMKO.
xi