Table of Contents
Advertisement
Operating Manual FK 105
Operation of the front sweeper
1. The sweeper is raised or lowered with the lifting tube "M".
For raising, the bar is simply moved up and down in relation to the step using the handle
until the sweeper completely engages in the "top position".
For lowering, the bar is lifted at the handle. After a slight resistance, the lowering occurs
slowly.
2. For swivelling the brush deck, hold the handle of the extension tube of the swivel rod
"O", lift it upwards and move it forwards or backwards in order to swivel to the left or to
the right. The locking comb "S" locks the respective position when you release the bar.
Note: If you raise the sweeper slightly, the swivelling is very easy.
3. The height adjustment of the brush is made using the knob "H". Undo the locking plate
by turning anticlockwise and adjust the height. The running brush should be pressed
approx. 15-20 mm on flat terrain.
M
H
S
13
O
Advertisement
Table of Contents
