4. Setting Up and Interfacing
6—Open the Paper Stopper on the Face-down Output Tray
Open the paper stopper as shown right.
7—Install the Face-up Output Tray
This face-up output tray is a separate option (PT-4) with the FS-1750.
If you want the printed pages stacked face-up (in reverse order), mount the face-up output
tray as follows.
Depending on the size of the paper you use, mount the paper stopper on the face-up output
tray as shown below.
12
Paper Stopper
Legal Size
A4 Size
Letter Size
Paper Stopper
Face-up Output
Tray