Martin Audio E1300 Manual page 3

< >
CONTENTS PRINT
GUIDES
8. Bridgeable output stage
9. Switchable high pass filters, frequency selectable
10. Balanced XLR inputs with link outs, and dedicated sub bass outputs
(when using plug in module)
11. Selectable input sensitivities and input mono sum facility
12. Speakon output sockets for Channel A, Channel B, and Bridge
4 WARNINGS
Do not use this amplifier if the mains cable is damaged.
Always operate this amplifier with the chassis ground wire connected
to the electrical safety earth.
Do not parallel or series connect an amplifier output with any other
amplifier output.
Do not connect the amplifier output to any other voltage source, such
as a battery, mains source or power supply, regardless of whether the
amplifier is turned "ON" or "OFF".
Do not run the output of any amplifier back into another channels
input.
Do not block the air intake or exhaust ports.
Do not operate the amplifier on or near any source of heat.
Do not stand water or any other liquid on or near the amplifier.
Do not spill or splash water, or any other liquid into or onto the
amplifier.
Do not operate the amplifier if liquid ingress is suspected.
Do not remove top cover. Removal of the cover will expose hazardous
lethal voltages and currents and may invalidate warranty.
Keep this manual for future reference.
3
All material © 2007. Martin Audio Ltd. Subject to change without notice.
Martin Audio – E1300 Amplifier