HoMedics MCS-300H Instruction Manual And Warranty Information page 9

NOTE: When
"POWER" button
is pressed for first-
time use, the moving
shiatsu mechanism
will automatically
move to the lowest
position before
starting a massage
program. After initial
use, mechanism
will always park at
lowest position. See
note below regarding
parking.
NOTE: The moving
Shiatsu massage
mechanism always
"parks" or finishes in
its lowest position.
It will continue to
this position after
the power has been
turned off. If the
electrical supply is
interrupted, when
power is restored,
the mechanism will
"park" or move to its
lowest position.
Shiatsu and Vibration
Massaging Cushion
Moving Massage Mechanism
Heat Button
For soothing heat when
massage is on, simply
press the heat button
and the corresponding
red L.E.D. light will
illuminate. To deselect,
press the button again
and the corresponding
L.E.D. light will turn off.
For your safety, heat
cannot be turned on if
massage is not selected.
Power Button
To turn on the massage
functions, first press
the POWER button.
The L.E.D. indicator will
illuminate and confirm your
selection. To turn off the
massage functions, simply
press the button again. The
L.E.D. indicator will blink
while the Shiatsu massage
mechanism returns to its
lowest point and then it
will turn off.
8
CON