BEFORE YOU BEGIN
STEP 1: INSTALL THE BATTERY
Remove the battery cover on the underside of the device.
1.
Plug in and insert the battery, keeping the red cable to the center of the device
2.
and the metal contacts facing up, then replace the battery cover.
STEP 2: PLUG IN THE POWER CORD
Plug the power cord into the device power port.
1.
Plug the power adapter into an AC wall outlet. The device will power on and
2.
guide you through a welcome process for connecting via Wi-Fi. Once complete,
verify at least one bar of the voice signal strength indicator (
move device to an alternative location that provides a stronger signal.
WARNING! Be sure to use the power cord that came with your device to avoid damage that
may void the warranty.
2
1
) is lit. If not,