Remote Control - Mitsubishi Electric VS-45605 Technical Training Manual

Remote Control

The Remote Control for VZ7 models is illustrated
in Figure 1-3. Its functions are straightforward.
The numerical buttons 0 through 9, are used to
enter numerical values for Time Setting, Alarm set-
ting, V-Chip Lock Code, etc. The buttons are also
used to directly access a channel.
The numerical buttons channel change is a three digit
system. Channels with less than three digits may be
accessed in one of three ways.
1) Add zeros prior to entering the channel
number, making it a three digit entry. Press
002 for channel 2.
2) Enter the channel number then press EN-
TER.
3) Enter just the channel number. There will
be a four second delay before the channel
change occurs.
When the QV (Quick View) button is pressed, the
TV changes to the previous channel selection. If
pressed again it returns to the original channel. Re-
peated pressing will toggle the TV back and forth
between the two channels.
When viewing a normal TV picture with no Menu
displayed, pressing Info activates the Detail Status
Display. This display includes:
• Channel Number
• Channel Name (if any)
• SAP, STEREO, CC, and SQV
• V-Chip rating (if any)
• Time display
Pressing Info in the user's Advanced Convergence
Mode, displays the functions of the buttons required
to set convergence.
Repeatedly pressing the "PIP/POP" button selects
the desired PIP mode. The following describes each
PIP feature and their sequence of activation.
Figure 1-3: Remote Control
1) Side by Side ...the main and sub pictures
are displayed side by side. Both pictures are
compressed horizontally to fit on the 4:3
aspect screen.
2) Three Picture Channel Scan ... the set
scans through channels, displaying the
content of three channels at a time in small
insert pictures. The insert for the current
channel in the scanning process is live, the
other two inserts are still pictures.
3) Single Insert Picture ... ¼ normal size
insert picture in the lower right corner.
The single PIP can be moved with the Up/Down
and Right/Left buttons on the Remote. When se-
lecting a specific PIP feature, the "PIP/POP" button
must be pressed within 10 seconds to select the next
Page 1-4
PIP/POP PIP INPUT PIP CH
PIP SIZE EXCH