Technical Manual
K2 S9800/K2 S9800SE
ACOUSTIC & ELECTRICAL SPECIFICATIONS:
• Nominal Impedance
• Max Amp Power
• Frequency Response
• Sensitivity
• Crossover Frequencies
SYSTEM COMPONENTS:
• Cabinet
• Grille
• Ultrahigh-Frequency
Transducer
DC Resistance
• High-Frequency Transducer
DC Resistance
• Low-Frequency Transducer
DC Resistance
• Crossover Network
PACKAGING
42
Harman Consumer Group, Inc., 250 Crossways Park Drive, Woodbury, New York 11797
8 Ohms
400 Watts*
45Hz – 50kHz (– 6dB)
94dB (2.83V @ 1 meter)
800Hz, 10kHz
K2 S9800/K2 S9800SE
(not for sale)
337854-001
1" (25.4mm) 045Be
beryllium (336318-001)
3.1 Ohms, ±3%
3" (76.2mm) 435Be
beryllium (337361-001)
3.6 Ohms, ±10%
15" (381mm) 1500AL
alnico (336308-001)
5.3 Ohms, ±10%
337978-001 (K2 S9800)
352043-001 (K2 S9800SE)
45
43
46
47
44
Legend on Pages 5-6
AURAL SWEEP TEST SPECIFICATIONS:
• System Aural Sweep Test
• L.F. Aural Sweep Test
• H.F. Aural Sweep Test
• U.H.F. Aural Sweep Test
PHYSICAL SPECIFICATIONS:
• Enclosure Dimensions
(H x W x D)
• Weight
WARRANTY:
• Refer to Warranty Statement packed with each product.
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
K2 S9800/K2 S9800SE WIRING DIAGRAM
UHF
336318-001
+
ORN
ORN/BLK
HF
337361-001
YEL
YEL/BLK
LF
336308-001
+
GRN/BLK
6.0V Input 40Hz to 50kHz
20.0V Input 20Hz to 600Hz
2.0V Input 500Hz to 10kHz
1.00V Input 7kHz to 50kHz
51" x 20" x 14-3/4"
Plus spiked feet
(1295mm x 508mm x 375mm)
198 lb/90kg (each)
Crossover Network
337978-001 (K2 S9800)
352043-001 (K2 S9800SE)
GRN
Rev 1 5/07