Advertisement
ASSEMBLY INSTRUCTIONS
Tools you will require
Adjustable spanners (or 2 x 13 mm spanners
and 1 x 19 mm spanner)
Phillips screwdriver
Paint brush with soap solution
4 mm hex allen key (supplied, attached to
burner)
IMPORTANT
Before proceeding with assembly of your patio
heater, unpack all the boxes and be sure that
you can identify all the parts shown below.
Note:
The legs and leg flange have been bolted
together for shipping purposes and will need to
be separated before assembly can begin.
There is also a rubber edging strip around the
lower rim of the burner tube**. This will need to
be removed before assembly. The rubber
edging around the leg flange must stay in place
to help prevent damage to the gas supply hose.
Base
complete with
wheels
Leg Flange
Burner
Pole
Leg
x 3
7
Regulator
M8 x 20 bolt (6)
M8 nut (6)
Self tapping Phillips head
screw (2)
Stainless steel
button head cap screw (4)
**
Hood
Bottle cover
Advertisement
